Unique Hydra can cater for a wide range of wetsuits for commercial application. Orders and also be custom made and printed to clients requirements. The following range of styles can be supplied.

* Only available on Code 4,5,6,7.

How to select a code:
1. Select Wetsuit Thickness: A, B or C
2. Select Style: Number 1-9 or combination of numbers
i.e. A 5mm Long John with Step in Jacket code will be: B5mm26

Description:

This contaminated water suit is made from vulcanized rubber with a two-way stretch polyester lining, has a high protection index against petroleum based chemicals and five times the abrasion resistance of the Viking Pro 1000. It features black integrated rubber reinforcements from the foot up over the knee, across shoulders and down on arms and in crotch area and has a gas- and watertight heavy-duty zip across the shoulders. It comes with Integrated suspenders for ease-of-wear and reinforced rubber boots. It is delivered in a bag with a repair kit, zip care tools and user manual.

Specifications:
Material: NITECS (HDS material)
Weight: 1050 g/m².
Colour: Black only
Certification: EN14225-2:2005 + HZ + BIO

Options:

• Viking HDS , SL27 yoke, surveyor latex neck, HDS glove/cuff rings, HD cuffs , Hazmat inlet, std hose , X2 exhaust
• Viking HDS , Magnum hood , surveyor latex neck , HDS glove/cuff rings , HD cuffs , Hazmat inlet , std hose , X2 exhaust
• Viking HDS , AH3 yoke , surveyor latex seal , HDS glove/cuff rings , HD cuffs , Hazmat inlet, std hose , X2 exhaust
• Viking HDS , HDS SL27 yoke , HDS glove/cuff rings , Pro cuffs, no valves, no neck seal (HAZMAT FREEFLOW)
• Viking HDS , HDS AH3 yoke , HDS glove/cuff rings , Pro cuffs, no valves, no neck seal (HAZMAT FREEFLOW)
  

Description:

These biological HAZMAT / contaminated water suits are made from red or black EPDM/ natural rubber with a two-way stretch polyester lining. The suit features black integrated rubber reinforcements from the foot up over the knee, across shoulders and down on arms and in crotch area and has a gas- and watertight heavy-duty zip across the shoulders. It can also be fitted with a rubber yoke for mating helmets as well as regular hood and neck seal. It comes with Integrated suspenders for ease-of-wear and reinforced rubber boots. It is delivered in a bag including repair kit, zip care tools and user manual.

Specification:

Options:

• HD Red / Black
• HD 1500, SL27 yoke, glove/cuff rings, HD cuffs, no valves, no neck seal (HAZMAT FREEFLOW)
• HD 1500, AH3 yoke, glove/cuff rings, HD cuffs, no valves, no neck seal (HAZMAT FREEFLOW)

Description:

These suits are made from red or black EPDM/ natural rubber with a two-way stretch polyester lining. The suit features black integrated rubber reinforcements from the foot up over the knee, across shoulders and down on arms and in crotch area and has a gas- and watertight heavy-duty zip across the shoulders. It comes with Integrated suspenders for ease-of-wear and reinforced rubber boots fitted with fin-strap holders. The suit is also fitted with rotating inlet and exhaust valves. It is delivered in a bag including repair kit, zip care tools and user manual.

Specification:

Material weight: is 1050 g/m2
Standard sizes: 00-05 & 01Wide- 04Wide
Certification: EN14225-2:2005 + BIO

Options:

• Viking PRO Surveyor, with latex hood, surveyor neck seal, pro cuffs, push protected inlet valve, X2 outlet & std hose
• Viking PRO Nautic, with Nautic hood, surveyor neck seal, pro cuffs, push protected inlet valve, X2 outlet & std hose

Description:

The HAZTECH suit has been developed as a lightweight robust suit for diving in hazardous and contaminated water conditions, particularly where there may be a danger of heat exhaustion in warm water or hot climatic conditions. The HAZTECH is easily cleaned, having a smooth exterior finish. These suits are made from black woven nylon, with a red thermoplastic polyurethane (TPU) exterior with high frequency welded seams for maximum strength and safety and heat applied internal seam tape. It also features black welded reinforcements applied to the shoulder area and elbows and embossed knee pads welded above and below the knees. The PU zipper is MED duty. Neo boots are included.

Specification:

Material weight: 483 g/m2
Certification: EN14225-2:2005 + HZ + BIO

Options:

• HAZTECH, Surveyor with latex hood & neck seal, Pro cuffs, HDS cuff rings, std hose & X2 exhaust valves
• HAZTECH, Magnum HDS hood, latex neck seal, Pro cuffs, HDS cuff rings, push protected inlet, std hose & X2 exhaust valves
• HAZTECH, SL27 HDS yoke, latex neck seal, Pro cuffs, HDS cuff rings, push protected inlet, std hose & X2 exhaust valve
  

Description:

The material is non compressible and more stable than traditional neoprene suits.
The suit will not shrink when constantly dried in an industrial dryer. It features an internal rubber tube with holes that sprays hot water at the diver, Apeks On/Off valve, 6 outlets, zipper protection and front pockets. Hot water gloves and boots available are also available.

Specification:

Material weight: VSN 1100 g/m2
Maximum W.P.: 40 bar
Certification: EN14225-3:2005 (undergoing)

Description:

This vulcanized rubber dry suit is made of black EPDM / natural rubber with a very flexible polyamide / elastane lining for maximum mobility and comfort . It features black rubber reinforcements from the foot over the knee to the seat, across shoulders and down on arms and in crotch area and a gas- and watertight medium-duty, HD Non Mag, chloroprene zipper. It is also fitted with rotating inlet and exhaust valves.

Specifications:

Certification: EN14225-2:2005 + HZ + BIO
Material weight: 1250 g/m2
Standard sizes: 00–05 & 01Wide–04Wide

Options:

• Viking PRO Surveyor, with latex hood and surveyor neck seal, pro cuffs, push protected inlet valve, X2 outlet & std hose
• Viking PRO Nautic, with nautic hood and surveyor neck seal, pro cuffs, push protected inlet valve, X2 outlet & std hose
  

Description:

This front entry suit is made from trilaminate material. It features vulcanized seams & non mag medium duty fitted zip with standard zip flap.

Specifications:
Material Weight: 255 gm/m2 (Nylon)
Certification: EN15027-1:2002

Options:

• Nylon or Cordura
• Yellow/black or red/black
• WRS FE. N100N nylon. Surveyor latex neck seal. Conical cuffs, neoprene boots
• WRS FE. N100N nylon. Surveyor latex neck seal. Conical cuffs, safety boots
• WRS FE. N100N nylon. Surveyor latex neck seal. Conical cuffs, Latex socks

Description:

A hood made from 6mm smooth skin neoprene and a 3mm smooth skin face seal which forms a seal with a full face mask.
The hood is attached to the suit via a Latex neck-seal and has a smooth and cleanable exterior. It is stretchy and comfortable. The seams are glued, stitched and taped inside. The hood is suitable for lightly contaminated water diving and particularly for biological contaminants.

Specification:

Size range: Sml, Med, Large, Xl, in black only

Description:

The Surveyor is a Latex hood which is permanently attached to a suit via a Latex neck-seal, and provides a basic level of protection for contaminated water diving.
It is Ideal for biological contaminated water diving. It must however be used in conjunction with a thermal liner to provide insulation, and to protect the ears.

Specification:

Sizes: Standard, Sml

Description:

This hood is manufactured from rubber material and provides the highest level of protection when diving in contaminated water and is easy to decontaminate. The seams are stitched inside, and vulcanised on the outside with a rubber tape. The Turbo relies on a layer of insulating air to provide protection to the ears. The hood is fitted with an inner latex hood which creates the face seal, and also seals directly against the neck , therefore there is no latex neck-seal attached to the suit. The material is extremely puncture and abrasion resistant just like the suit material.

Specifications:

Size range: Med, Large, XL in black only. It incorporates a Velcro adjustable strap at the back of the hood in order to adjust the fit of the face seal.

Options:

Std for fitting to PRO, PROTECH and HD suits.
HDS for fitting to HDS or HAZTECH suits.

Description:

A SCUBA unit can be comprised of separate components such as: cylinders, regulators, and a pressure gauge. The regulators described in this catalogue can be used with components units certified according to directive 89/686/EEC and EN 250: 2000
norm. The air contained in all cylinders comply with the requirements for breathable air defined by EN 12021 norm.
The maximum operating depth for EN250:2000 is 50 meters (164 ft.) however;
divers must conform to the limits set by local regulations in force at the diving location.

Brands Supplied:

Apeks
Aqualung
Mares
Poseidon
Scubapro

Description:

This regulator is part of the Extreme Range NORSOK U101 which has a 200m approval.
It is US Navy tested and features balanced diaphram, built-in anti freeze protection, and has a working pressure of 300bar.

Specification:

Trimix: Yes (max 21% oxygen)
Nitrox 50%: No
Oxygen (99,95%): No
Oxygen Approved (EN738-1): No
O-rings: Nitril/EPDM
2nd stage Xstream Deep Mk3 Available
NORSOK approved: Yes
Certified: CE En250 cold water approved

Specifications:
Certified: USN for Cold Water & INPP for 100m Heliox, Trimix

Description:

This regulator consists of solid chrome plated marine brass 1st-Stage Body and Components and delivers high performance in Warm and Cold Water (to 4300psi). The piston is air-balanced.

Specifications:

HP Ports: 2
LP (high flow) Ports: 5
Certified: CE EN250

Options:

Titan 1^st Stage ITEM IN002422_SA
Titan 2^nd Stage ITEM IN002420_SA

Description:

Ideal Regulator for shallow water bail-out system with a balanced piston.

Specifications:

Piston DIN
Hp Ports: 1
LP Ports: 3
Certified: CE Approved

Description:

This unit features balanced diaphragm design.

Options:

Diapram DIN
HP Ports: 2
LP Ports: 4
Certified: CE EN250

Description:

The unit comes with a whip

Specification:

Certified: CE EN250 2000

Description:

A submersible pressure gauge with a 80cm hose and brass body

Specification:

Certified: CE EN250 2000

Description:

This unit features a SPG and depth gauge combination with a MDI (Maximum Depth Indicator) and is altitude adjustable.

Options:

10L 232 Bar Complete with Boot & Valve: Item IN003214_SA
12L 232 Bar Complete with Boot & Valve: Item IN008033_SA
15L 232 Bar Complete with Boot & Valve: Item IN008034_SA
10L 300 Bar Complete with Boot & Valve: Item IN008035_SA
M25 x 2 Thread
Twin Sets Option with Isolating Manifold available

Options:

200Bar M25 x 2 DIN or A-Clamp: Item IN000479
300 Bar M25x2 DIN: Item IN003553_SA
232Bar ¾ BSP Din or A-Clamp: Item IN011459_SA
Please enquire about modular valve systems

Options:

DIN or A-CLAMP

Specifications:

Bail-out configurations consists of a AR VEST, 1St Stage, Miflex MP hose, pressure gauge and can either be a 232 or 300 Bar System.

Options:

• 200m Cold Water Bail-Out Configuration: Poseidon XTREME, NORSOK 200m
• 100m Bail-Out Configuration: MARES Mr22, 100m INPP for Heliox / Trimix Scubapro Mk25, EN25: 2000
• 50m Bail-Out Configuration: Poseidon Cyklon, Standard EN250 Aqualung TITAN, Standard EN250 Mares Mr12, Standard EN250
• <30m Bail-Out Configuration: Hydra 810 Set, EN250, Hydra 819 Set, EN250

Description:

Tough Basic Jacket Style

Options:

Aqualung Wave
Mares Rover BC

Description:

Weight-integrated back inflation heavy duty wing style.

Specifications:

• Fabrics: Air cell; rugged 840 D nylon, Armor X, V-Diamond rubber, Ballistic Nylon.
• Detachable Weights: All sizes hold 32lb/14.5kg,
• Non-Detachable Weights: All sizes hold up to 10 lb/4.5kg
• Lift Capacity (LBS/N): SM/MD - 52/230 ML/LG - 52/230 XL/XXL - 52/230
• Colour: Black
• D-Rings: 5 x Stainless Steel Angled

Description:

Heavy duty wing style and continuous harness with stainless steel back plate for optimal stability when using twin cylinders.
The BC features two shoulder D-rings, one waist stainless steel D-ring on the left side and a 50mm wide crotch strap with two stainless steel D-rings. It’s single tank system with single tank adapter and two super cinch straps.

Specifications:

• Fabric: 1680 DEN Ballistic Nylon outer shell, 420 DEN Nylon inner bladder and Stainless Steel back plate.
• Lift Capacity: 18 kg/30 lb, 27 kg/ 60 lb for twin cylinders.