pdf-catalogues

 

pic01
pic02
pic03
pic04
pic05
pic06
pic07
pic08

Hyperbaric Products

 

 

Fire Extinguisher

Model No: Hydra 7L

Carbon Dioxide Scrubber

Model No: Hydra 500

Micron Filter

Model No: Hydra HP Filter


Model No: Hydra 5000ml
Model No: Hydra 500
Model No: Rm7622

Description:

For use in Class A, B and electrical fires (24VDC). The discharge hose is designed to fit directly to the HP refill source. No special recharging adapters and regulators are required. Refill cartridges of AFFF are available.

Specification:

Length x Width x Height: +/- 540mm x 230mm x 230mm
Weight: +/- 8.8kg
Capacity: 4750ml water / 250ml AFFF
Operating Depth: 300 MSW
Working Pressure: 124 bar

Description:

The Hydra 500 carbon dioxide scrubber is the scrubber of choice for air and saturation systems. With a high reliability and simple design, the Hydra 500 gives you a neat, easily cleanable and compact scrubber. The size enables it to fit through most medical locks and equipment locks.

Specification:

Length x Width x Height: +/- 260mm x 250mm x 270mm
Weight: +/- 5.2kg
Operating Depth: up to 300 MSW
Gas Flow: 420 Litres / min (actual)
Canister Capacity: 4.5 Litres
Power Requirements: 12 / 24VDC
(current draw = 1Amp at depth)
Electrical Connector: MCIL3F
Locking Sleeves: DLSA-F

Description:

Need a high flow, high filtration filter on your breathing air lines? The HMF 300-15 is the solution; with 3/4 inch ports, a maximum working pressure of 300 bar and a flow rate of 60 m³/ min, this filter does the job.

Specification:

Length x Width x Height: +/- 225mm x 90mm x 90mm
Weight: +/- 5.8kg
Flow Rate: 60 m³/ min at 200 bar
Filtration: 15
Connection Size: 3/4 inch
Working Pressure: maximum 300 bar
Test Pressure: 450 bar

 

Oxygen Monitors

Model No: Hydra O² Monitor

Bell Heater

Model No: Hydra 501

Back Pressure Regulator

Model No: BPR 3.9


Oxygen Monitors
Bell Heater
Back Pressure Regulator

Description:

Measures oxygen concentrations in breathable
gas mixtures. 0.1% oxygen accuracy. Updates 4
times per second. Alarm included (with high
and low oxygen level limits).

Specification:

Length x Width x Height: +/- 250mm x 180mm x 70mm
Weight: +/- 0.5kg
Power Source: 3 x AA Batteries

Description:

Looking for bell heating / cooling options? The Hydra 501 bell heater is a reliable and inexpensive solution.

Specification:

Length x Width x Height: +/- 520mm x 310mm x 280mm
Weight: +/- 12.7kg
Operating Depth: up to 300 MSW
Gas Flow: 420 Litres / min (actual)
Heating Capacity: 2.5kW
Power Requirements: 12 / 24VDC
(current draw = 1Amp at surface)
Electrical Connector: MCIL3F
Locking Sleeves: DLSA - F
Connection Size: 3/4 inch NPT female fitting

Description:

Negatively-biased, dome-loaded, depth-tracking back-pressure regulator. Oxygen cleaned.

Specification:

Length x Width x Height: +/- 230mm x 160mm x 140mm
Weight: +/- 4.2kg
Operating Depth: up to 450 MSW
Flow Capacity: 3.9 (Cv) with a reseat pressure
of < 0.1 bar
Connection Size: 3/4 inch NPT female fitting
Back-Pressure: Adjustable 0.2 - 2.5 bar

 

HELPS Lung Powered Scrubber

Model No: HELPS

CO² Lung Powered Scrubber

Model No: Hydra 1.5L

Hyperbaric camera

Model No: HyperCam 300


HELPS Lung Powered Scrubber
CO² Lung Powered Scrubber
Hyperbaric camera

Description:

Hyperbaric evacuation lung-powered scrubber for contaminated environments. Removes harmful organic gases / vapor with boiling point > 65 °C and inorganic gases / vapor such as chlorine, hydrogen sulphide, hydrogen cyanide, sulpher dioxide, hydrogen chloride, ammonia, carbon monoxide, and mercury vapor. It also removes particles and nitrous gases such as nitrogen monoxide thereby reducing breathing resistance. Replacement filter cartridge and soda sorb cartridges are available.

Specification:

Length x Width x Height: +/- 640mm x 350mm x 130mm
Canister Volume: 2.2 Litres
Canister Duration: 6 hours

Description:

Lung-powered scrubber for removal of carbon dioxide. Replacement filter cartridge and soda sorb cartridges are available.

Specification:

Length x Width x Height: +/- 620mm x 270mm x 130mm
Weight: +/- 1.1kg
Canister Volume: 1.5 Litres
Canister Duration: 4 hours
Materials: hardened acrylic, neoprene and
HDPE

Description:

The HyperCam 300 provides reliable day and night surveillance in a compact, water resistant design that integrates 18 infrared LED’s for 18m (59ft) of IR-cut filtered night vision. Incorporating a SuperHAD 1/3 inch CCD, the HyperCam 300 delivers 520 TVL colour imaging during day and 18m (59ft) of active-infrared night vision under zero lux.

Specification:

SuperHAD 1/3 inch CCD, 520 TVL
18m (59ft) night vision in zero lux
Mechanical lens filter for 24/7 performance
4mm - 9mm varifocal lens
Compact all-weather housing

 

HeartStart FRx Defibrillator

Model No: Phillips FRx

DAN Resuscitation Kit

Model No: DRKII

SAN Resuscitator

Model No: PL22


HeartStart FRx Defibrillator
DAN Resuscitation Kit
SAN Resuscitator

Description:

SMART Biphasic waveform advanced technology with impedance compensation optimizes the therapy to each individual patient. Simple 1-2-3 operation makes de-fibrillation easy. On-demand CPR coaching helps guide the user/ responder every step of the way. The HeartStart FRx de-fibrillator is powered by an easy to install, long-life (four-year) battery. The device's automated daily, weekly and monthly self-tests check the pad’s readiness, and verify functionality and calibration of circuits and systems. With over 85 tests, the FRx is one of the most comprehensive self-testing devices on the market and is virtually maintenance-free. The device features Pre-connected SMART Pads II (adult, peads and infants), infant / child key (optional), and wireless data transfer.

Specification:

Length x Width x Height: +/- 220mm x 180mm x 60mm
Weight: +/- 1.5kg

Description:

The kit consists of a 1600 Pelican waterproof case, brass multifunction regulator, demand valve with hose, 6.36 Litre Aluminium cylinder, oral nasal resuscitation mask, and non-rebreather mask with 6' hose.

Specification:

Length x Width x Height: +/- 600mm x 530mm x 230mm
Weight: +/- 14kg
Delivery: +/- 60 minutes

Description:

The kit consists of a SAN resuscitator, 2 x 4.2 Litre cylinders, 2 x demand valves, 1 x pocket mask, 1 x non-rebreather mask, Charging whip, and portable carry case. Regulators c/w DAN certification.

Specification:

Length x Width x Height: +/- 62cm x 50cm x 21cm
Weight: +/- 32kg
Delivery: +/- 112 minutes