Hydraulic Tools
Hammer Drill |
Sinker Drill |
Impact Drill/ Wrench |
|
Model No: |
HD 45 |
SK 58 |
ID 07 |
 |
 |
 |
|
Description: |
The tool features a feathering ON/OFF trigger and forward/reverse rotation control. Nitrogen charged accumulator. Hose whips are included. Flush-face quick disconnect couplers are not included with this tool. | The tool uses air flushing to clear holes of debris and has an easy start feathering trigger and direct-drive rotation motor. It can drill up to a 76.2mm diam. hole up to 6.1m deep. Hose whips and an air hose whip with a 3/8 inch quarter turn valve are included. Quick disconnect couplers are not included. | The tool has a swing hammer mechanism. It features reverse spool wiper seals, built-in reverse check valve, foamed plastisol handle, cast-in lifting eye and accessible dual-spool selector. Hose whips are included. Quick disconnect couplers are not included. |
Specification: |
|||
| Length x Width x Height | 570mm x 350mm | 660mm x 460mm | 216mm x 114mm x 254mm |
| Weight | 20.4kg |
30kg | 3.3kg |
| Flow range | 26-34 lpm | 26 – 34 lpm | 15 – 45 lpm |
| Chuck Capacity | Up to 2 inch diameter or 4 inch core | 1 inch Hex x 4 - 1/4 inch Shank | 7/16 inch Quick Change or 1/2 inch Square Drive |
| Maximum Pressure | 105 – 140 bar | 105 – 140 bar | 50 – 140 bar |
| Ports | 8 SAE O-ring | 8 SAE O-ring (Hydraulic) inch NPT (Air) | 8 SAE O-ring |
| Motor | Internal | Integral | Stanley HYREVZ™ gear |
| Rotation speed | Adjustable up to 300 rpm | ||
| Connector | 3/8 inch male pipe hose end | 3/8 inch male NPT hose end | |
| Torque | 675 Nm | ||
| Options | SK 58 130: Capacity 7/8 inch Hex x 4 - 1/4 inch Shank | ||
Model No: |
DrillDL 07 |
Chipping HammerCH15 |
Chipping HammerCH18 |
 |
 |
 |
|
Description: |
Reversible tool with assist handle. Hose whips are included. | A reliable and robust underwater shipping hammer. | The chipping hammer of choice and big enough to handle most job requirements. |
Specification: |
|||
| Length, Width (at handles) | 229mm | 430mm | 510mm |
| Weight | 2.7kg |
7.25kg | 10.9kg |
| Flow range | 350rpm @11.36 lpm 475rpm @15.14 lpm 750rpm @22.71 lpm 1000rpm @30.28 lpm 1250rpm @37.85 lpm |
26 - 34 lpm | 26 - 34 lpm |
| Chuck Capacity | 12mm | ||
| Maximum Pressure | 140 bar | ||
| Ports | 8 SAE O-ring | ||
| Motor | Stanley HYREVZ™ gear |
||
| Rotation speed | Adjustable up to 300 rpm | ||
| System Type | Open center/closed center | ||
| Connector | 1/2 inch flush face, quick disconnect couplers |
3/8 inch NPT | |
Model No: |
Diamond Chain SawDS 11 |
Diamond Chain SawCS06 |
Diamond Chain SawCS11 |
 |
 |
 |
|
Description: |
These tools cut square corners without over-cuts and the labor and expense of corner drilling and patching. They have plunge cut capability. Ergonomic handles and guards help to reduce operator fatigue and provide protection from contact with the chain or materials being cut. The Heavy-duty cast aluminum chain guard prevents a loose or broken chain from being thrown from the saw. The Wall Walker™ that provides leverage for cutting is standard equipment. | ||
Specification: |
|||
| Length x Width (incl. Bar & Chain) | 890mm / 970mm x 230mm | 360mm x 230mm | 430mm x 230mm |
| Weight (incl. Bar, Chain & Couplers) | 11.8kg | 2.8kg | 6kg |
| Capacity (cut length) | 380mm / 450mm | 300mm / 380mm / 510mm | 610mm / 760mm / 1090mm |
| Pressure | 140 bar | 70 - 140 bar | 105 – 140 bar |
| Flow Range | 45 lpm | 26 - 34 lpm | 38 – 53 lpm |
| Ports | 8 SAE O-ring | 8 SAE O-ring | 8 SAE O-ring |
| Connection | 3/8 inch flush-face quick disconnect coupler | 3/8 inch NPT male adapter | ½ inch Male pipe hose end |
| Lubrication / Cooling | Internal water channels in bar | ||
| Hose Whips and Couplers | included | not included | included |
Model No: |
GrinderGR 29 U/W |
Cutoff SawCO 23 |
|
 |
 |
||
Description: |
The tool features an adjustable wheel guard and assist handle. | The tool features a cast aluminum handle with inter-locking safety trigger, an adjustable wheel guard and built-in flow control to prevent over-speeding and a blade brake that retards spindle rotation. | |
Specification: |
|||
| Length x Width | 280mm x 305mm (with guard) | 495mm x 279mm | |
| Weight | 6.4kg (with guard) | 10.4kg | |
| Capacity | 9 inch wheel on 5/8 - 11 inch arbor | 254mm wheel on 25.4mm arbor | |
| Performance | 2700rpm @38 lpm | CCW / 3300 | |
| Pressure | 70 – 176 bar | 105 – 140 bar | |
| Flow Range | 15 - 38 lpm | 38-57 lpm operating range | |
| Ports | 8 SAE O-ring |
8 SAE O-ring | |
| Motor | Stanley HYREVZ™ gear | Integral HYREVZ™ gear | |
| Connection | 1/2 inch male pipe hose end | ||
| Hose Whips and Couplers | not included for all models | included, disconnect couplers not included (2 x part #03971) |
|